Seattle King Street Late Trains: Two Arrivals Ten Minutes Apart, Then 10:50 PM
Seattle's late-train list is built for early evenings. Our data counts three scheduled arrivals at King Street Station between 9 PM and 5 AM and lists all three, and all three are daily: Cascades 519 at 9:10 PM, Cascades 506 at 9:20 PM and Cascades 508 at 10:50 PM. The first two arrive only 10 minutes apart. The third follows 90 minutes after the second. None is marked long-distance, none arrives after midnight, and the list is the same on every day of the week.
This guide is for rideshare drivers, taxi drivers and chauffeurs who work Seattle in the evening. It quotes only the scheduled late arrivals in our data, which come from one week of a timetable in early October 2026 and can change. Trains that arrive between 5 AM and 9 PM are not covered, and the times shown are scheduled times, not real arrivals. It says nothing about the station's layout, pickup zones or rules, so follow the posted signs, the staff and your platform's rules. For the general method of working a station, see our guide to train station and bus terminal pickups.
The short answer
- Our data counts 3 scheduled arrivals at Seattle King Street between 9 PM and 5 AM and lists all three: 9:10 PM, 9:20 PM and 10:50 PM.
- All three are listed daily, and none is marked long-distance.
- The first two are 10 minutes apart. The second and third are 90 minutes apart, and the first and third are 100.
- The nearest airport is Seattle-Tacoma Airport (SEA); Everett Airport (PAE) and Bellingham Airport (BLI) follow.
- 10:50 PM is the latest of the three, and the three are all that our data counts between 9 PM and 5 AM.
- Check live arrival times: a scheduled time is not a promise.
The three listed arrivals
These are the scheduled late arrivals in our data, with the days exactly as listed.
| Arrival | Train | Days listed | Long-distance |
|---|---|---|---|
| 9:10 PM | Cascades 519 | Daily | No |
| 9:20 PM | Cascades 506 | Daily | No |
| 10:50 PM | Cascades 508 | Daily | No |
Because all three are daily, Monday to Sunday each list the same three arrivals in the same order. That makes the list simple to learn and easy to build a routine around.
The ten-minute pair
The first two arrivals are the ones that matter for planning, because they are close.
| From | To | Minutes apart |
|---|---|---|
| Cascades 519, 9:10 PM | Cascades 506, 9:20 PM | 10 |
| Cascades 506, 9:20 PM | Cascades 508, 10:50 PM | 90 |
| Cascades 519, 9:10 PM | Cascades 508, 10:50 PM | 100 |
Ten minutes is a very short gap between two trains. If both trains run to time, their passengers may reach the pickup area at about the same moment. If one runs late, they may overlap even more. For a driver, that means one longer wave in place of two short ones. A clear message with your car, your color and your meeting point matters more than usual, because several people may be looking for a ride at once.
The 10:50 PM arrival stands alone. It comes 90 minutes after the pair, which is long enough to finish a ride from the earlier trains and return, or to take a break.
Three ways to use the evening
Our data has no passenger numbers for these trains, so we cannot say which arrival is biggest. Here are three practical approaches, depending on how you work.
- Meet the pair. Be near the station for 9:10 PM and 9:20 PM and treat them as one wave. Decide beforehand how many rides you can take from it.
- Meet the last. Skip the pair and arrive for 10:50 PM. It is alone, with no other listed train close to it.
- Meet the pair and the last. The 90-minute gap is a natural window for a short ride and a break.
Choose before the evening starts. Your car, your platform and your rest all matter, and no single choice suits every driver. If you work only part of the evening, say from 10 PM on, the last arrival is the one that falls inside your hours.
Seattle-Tacoma Airport (SEA) and the late hours
Seattle-Tacoma Airport (SEA) is the first airport our data lists for King Street Station, 10.4 miles away in a straight line. It ranks 12th among the 328 airports in our data and uses Pacific time. These figures are PeakMere estimates, rounded, from typical days over the last 12 months.
- Between 10 PM and 2 AM, about 9,300 people land on a typical night, 14% of the day's arriving travelers.
- The last busy arrival hour is 11 PM to 12 AM, after the last listed train.
- The quietest three hours for arrivals run from 2 AM to 5 AM, at about 170 people per hour.
The last listed train arrives at 10:50 PM, and the airport's last busy arrival hour follows soon after. That is a coincidence of timetables, not a measured link between train riders and flight passengers. It does give a clean evening for a driver who likes order: trains first, airport after.
The other airports in the list
Our data lists airports for King Street Station, from nearest to farthest. After Seattle-Tacoma Airport (SEA) comes Everett Airport (PAE), 21.4 miles away, ranked 173rd among the 328 airports. Bellingham Airport (BLI) is next, ranked 193rd. We do not quote hourly figures for them here.
A routine for a repeating evening
Because the list is the same every day, you can plan it the way you plan a standing appointment.
- Check the live arrival time before you leave. A scheduled 9:20 PM can be earlier or later, and a late train changes your plan.
- Pick your wave before the evening begins: the pair, the last, or both.
- Use a legal, well-lit waiting spot and follow posted signs and staff.
- Message the passenger with your car, your color and the door or landmark you chose.
- Prepare the trunk and the cabin. People arriving by train may carry luggage.
- Leave time for the airport hour if you plan to move there after 10:50 PM.
- Plan your rest. The gaps between waves are a good place for a proper break.
What the list does not tell you
- It is not the full timetable. Our data counts three scheduled arrivals at the station between 9 PM and 5 AM and lists all three. Trains that arrive between 5 AM and 9 PM are not covered.
- Scheduled is not real. Trains arrive early or late, so check the live time.
- It is one week of a timetable from early October 2026. Timetables change with the season, so dates and times can change.
- It does not count riders. Our data has no passenger numbers for these trains.
- It does not describe the station. Layouts, pickup areas and rules differ and change. Follow the posted signs.
Quick checklist
- 3 scheduled late arrivals counted and listed, all daily: 9:10 PM, 9:20 PM and 10:50 PM.
- The first two are 10 minutes apart; the third comes 90 minutes after the second.
- None is marked long-distance, and none arrives after midnight.
- Nearest airport: Seattle-Tacoma Airport (SEA), whose last busy arrival hour is 11 PM to 12 AM.
- Check live arrival times, use a legal waiting spot, and follow posted signs.
- Decide which wave you will meet before the evening begins.
PeakMere helps Seattle drivers turn a repeating evening into a plan they can trust.